Condutor de cobre XLPE isolamento do cabo de alimentação IEC 60502 padrão

Porta:	Tianjin ,port
Termos de pagamento:	T/T
Capacidade de fornecimento:	50000 Medidor/medidores por Month
Lugar de origem:	Hebei China
Marca:	RNEDA
Número do Modelo:	YJV32
Tipo:	Baixa tensão
Aplicação:	Subterrâneo
Material do condutor:	Cobre
Revestimento:	PVC
Material de isolação:	XL mícrons
Product name:	xlpe insulated copper cable
Certificate:	ISO9001/ISO14001 /OHSAS18001/CCC
Conductor:	Bare Copper
Insulation:	XLPE
Rated voltage:	0.6/1KV
Standard:	IEC60502-1
Sheath:	PVC
Core:	1-5 core
Color:	Black,red ,yellow....
Armored:	SWA
Detalhes de entrega:	As per order
Detalhes da embalagem:	Standard drum for xlpe insulated copper cable

Product Description

IEC 60502 standard copper conductor XLPE insulation power cable

TOP TEN CABLE MANUFACTURER/EXPORTER IN CHINA

LARGEST CABLE MANUFACTUER IN NORTH CHINA
ANNUAL EXPORT VOLUME EXCEED 200MILLION USD
WITH UL,TUV,KEMA,CE,BV,PSB,SABS,LLOYD'S,GL,NK,KR,ABS PRODUCTS CERTIFICATIONS
WITH TUV TYPE TESTING REPORT
WIDE PRODUCTS RANGE
ISO9001,ISO18001,OHSAS18001 SYSTEM CERTIFICATIONS
CNAS APPROVAL LABROTARY

1 Product Standard

This product is manufactured according to GB/T12706.1, equivalent to IEC60502.1. Or BS, DIN, ICEA standard as customer request.

2 Application

The product is suitable for power transmission and distribution lines with rated power frequency voltage up to and including 0.6/1KV.

Operating Performance

1). Rated power frequency voltage Uo/U: 0.6/1KV.
2). Max. Permissible continuous operating temperature of conductor: 90℃
3). Max. Short-circuit temperature of the conductor shall not exceed: (5S maximum duration) 250℃

4). The ambient temperature under installation should not below 0℃
5). The bending radius of a cable should not be less than 15 times of the cable diameter.

6). The test voltage (A.C.): 3.5kV/5min.

7). The flame-retardant properties of cable comply with grade A, B, C of GB/T19666-2005 or IEC60332.

3 Construction:

Conductor: Solid or stranded copper,aluminum

Insulation: Cross-linked polyethylene( XLPE or PVC)

Circuit Identification: The insulation shall be red, black

Filler: Polypropylene lament with lapped binding tape

Inner Sheath: Polyvinyl chloride (Black)

Armor: Galvanized steel wire

Core-covering: Binding tape

Outer Sheath: Polyvinyl chloride (Black)

Package: Wooden Drum Package or Iron-wooden drum

Type and name:

Type	Designation	Applications
YJV	Copper conductor,XLPE insulated,PVC sheathed power cable	For laying indoors,in tunnel or cable trench,unable to bear external mechanical forces.Single core cable is not allowed to laid in magnetic duct.
YJLV	Aluminum conductor,XLPE insulated,PVC sheathed power cable
YJY	Copper conductor, XLPE insulated,PE sheathed power cable
YJLY	Aluminum conductor, XLPE insulated,PE sheathed power cable
YJV22	Copper conductor,XLPE insulated,steel tape armoured,PVC sheathed power cable	For laying indoors,in tunnel in cable trench,or direct in ground,able to bear external mechanical forces.Single core cable is not allowed to laid in magnetic duct.
YJLV22	Aluminum conductor,XLPE insulated,steel tape armoured,PVC sheathed power cable
YJV23	Copper conductor,XLPE insulated,steel tape armoured,PE sheathed power cable
YJLV23	Aluminum conductor,XLPE insulated,steel tape armoured,PE sheathed power cable
YJV32	Copper conductor,XLPE insulated,steel wire armoured,PVC sheathed power cable	For laying indoors,in tunnel cable trench,well or direct in ground,able to bear external mechanical forces and certain pulling force.
YJLV32	Aluminum conductor,XLPE insulated,steel wire armoured,PVC sheathed power cable
YJV33	Copper conductor,XLPE insulated,steel wire armoured,PE sheathed power cable
YJLV33	Aluminum conductor,XLPE insulated,steel wire armoured,PE sheathed power cable

Type		No. of cores	Nom. Cross-section of conductor (mm2)
Copper conductor	Aluminum conductor	No. of cores	Nom. Cross-section of conductor (mm2)
YJV YJY	–	1	1.5-800
–	YJLV YJLY		2.5-800
YJV22 YJV23	YJLV22 YJLY23		10-800
YJV YJY	–	2	1.5-300
–	YJLV YJLY		2.5-300
YJV22 YJV23	YJLV22 YJLY23		4.0-300
YJV32 YJV33	YJLV32 YJLY33		10-300
YJV YJY	–	3	1.5-400
–	YJLV YJLY		2.5-400
YJV22 YJV23	YJLV22 YJLY23		4.0-400
YJV32 YJV33	YJLV32 YJLY33		10-400
YJV YJY	–	4	1.5-400
–	YJLV YJLY		2.5-400
YJV22 YJV23	YJLV22 YJLY23		4.0-400
YJV32 YJV33	YJLV32 YJLY33		10-400
YJV YJY	–	3+1	1.5-400
–	YJLV YJLY		4.0-400
YJV22 YJV23	YJLV22 YJLY23		4. 0-400
YJV32 YJV33	YJLV32 YJLY33		10-400
YJV YJY	–	5	1.5-400
–	YJLV YJLY		2.5-400
YJV22 YJV23	YJLV22 YJLY23		4.0-400
YJV32 YJV33	YJLV32 YJLY33		10-400
YJV YJY	–	4+1	1.5-400
–	YJLV YJLY		4.0-400
YJV22 YJV23	YJLV22 YJLY23		4. 0-400
YJV32 YJV33	YJLV32 YJLY33		10-400
YJV YJY	–	3+2	1.5-400
–	YJLV YJLY		4.0-400
YJV22 YJV23	YJLV22 YJLY23		4. 0-400
YJV32 YJV33	YJLV32 YJLY33		10-400
The armoured single core cables are used for D.C. system only. As for A.C. system,non-magnetic armour material should be used, or a magnetic isolation should be applied.

Certification

We are one of China top rank cable&wire manufacturer.Our products meet standards of GB, IEC DIN ASTM, JIS, NF, AS/NZS CSA GOST and so on. We also have obtained ISO9001,ISO14001,OHSAS18001, UL,CE,

KEMA, TUV, SABS,PBS,Bureau Veritas, Lloyd,GL,NK,KR certifications.

We have obtained UL certifications for TC cable, DLO cable,RHH/RHW/RHW-2,XHHW/XHHW-2/SIS, THHN,SER/SEU/USE, MV-90/MV-105,MC cable,AC cable,TECK 90,SOOW,Welding cable,Mining cable,type DG,PV cable,Shipboard cable and so on.

Packaging & Shipping

Company Information

Hebei Huatong Wires and Cables Group Co., Ltd was established in 1993, covering an area of 230, 000 square meters. We own more than 420 sets manufacturing equipment and 250 sets of testing equipment or apparatus. Our annual production capacity is 5 billion Yuan.We have 1200 employers, among which 150 are technicians. Based on the scientific management, now we are a comprehensive, large-scale enterprises in wire and cable industry.Voltage up to 35KV, including X L P E power cables,PVC power cables, mining cables, rubber cables for general purpose, Submersible oil pump cables, solar cables, shipboard cables,lead sheath cables, aerial cables, control and instrument cables, special cables etc.Products are exported to USA, Australia, Singapore, Europe, South America, Middle East, Asia, Africa. CNAS accredited national level laboratory.

Laboratory

CNAS accredited national level laboratory.

FAQ

(1).When can I get the price?
We usually quote within 6 hours after we get your inquiry. If you are very urgent to get the price,please call us or tell us in your e-mail so that we will regard your inquiry priority.

(2).How can I get a sample to check your quality?
After price confirmation, you can require for samples to check our quality. Sample is free, but the freight charge should be paid.

(3).How long can I expect to get the sample?
After you pay the freight charge and send us confirmed files, the samples will be ready for delivery in 3-7 days. The samples will be sent to you via express and arrive in 3~5 days. You can use your own express account or prepay us if you do not have an account.

(4).What about the lead time for mass production?
Honestly, it depends on the order quantity and the season you place the order.The best record we keep is delivering 10 kilometers cable within a week. Generally speaking, we suggest that you start inquiry two months before the date you would like to get the products at your country.